All Weather Roofing Compound Bitumen Waterproof Roof Coating 25 Litre

Product Information

They are usually in the form of preformed panels with the sheet metal already bonded to a plywood background. Elastodeck is the solution a compatible coating which can be applied onto bituminous surfaces over one year old. Self Adhesive Bitumen installation involving heat-activated 'DUO' technology, hot air welding techniques or adhesive bonding with PIR flat board insulation to provide solutions that are durable, resilient to the natural elements and give excellent fire resistance.

Employers, employees, and self-employed individuals involved in working at heights are affected by these regulations. Asphalt occurs naturally in asphalt lakes and rock but is more commonly obtained from the process of refining crude oil.Type 1 traditional organic woven rag based felts have been removed from the British standards and should not be used. Thanks to the vegetation, the roof will be better protected against weather influences and temperature fluctuations.

Heated onsite with a gas torch, the modified bitumen pours down the face of the roll to form a small pool. The most popular and fastest way to do this is to clean the surface using a pressure washer powered at 220 bar / 3200 psi and equipped with a rotating nozzle with a zero degree angle.

The advantages of SBS modified torch-on are a faster flow of bitumen, less heat required (resulting in cost, time and energy savings) and greater flexibility in cold climates. In our roofing tools section, you will also find accessories to suit all your felt flat roofing needs, including galvanised V-lipped steel pouring buckets, tar bowls, and more.

Bituminous roofing systems can be used for green roof build ups with a root resistant cap sheet which stops the roots from penetrating the waterproofing system. If further coats are applied with a roller, a minimum of two coats will usually be required to achieve the prescribed thickness. Bitumen roofs are subject to extreme conditions and many stresses due to contraction as a result of changing temperatures. Constructed from a GRP laminate, it has a specially formulated liquid roofing resin and reinforcement mat.Proper through-ventilation is crucial to prevent condensation during cold weather (refer to BS 6229:2003). Garland UK was appointed to inspect the signs of water ingress, carrying out a site visit by the local Garland Technical Manager, Dan Crowley, to investigate the root cause and custom solution to the issue.